Dromex DUST MASK FFP1

R79.07

In stock items:
Sameday Shipping - Delivery 3-5 business days
Any Backordered items:
Ships within 2 weeks, add 3 - 5 business days for delivery

In stock (can be backordered)

Low breathing resistance for increased wearer comfort
Light weight & comfortable
Elasticated straps
PP inner with no loose fibres
Protection against solid and water based liquid aerosols
For use in low toxicity dust areas when used in

PRODUCT RATING

SANS 10338:2009
NRCS AZ2006/21

COMPOSITION

Polypropylene
Polyester synthetic material

SUITABLE FOR USE IN

General household maintenance
Agriculture
Construction
General material handling industries

Additional information

Weight 0.91 kg
Dimensions 20 × 13 × 14 cm
Special Instructions

These respirators do not supply oxygen. DO NOT use in oxygen deficient atmospheres (e.g. tanks or other poorly ventilated areas). The lifetime of a filter depends on many factors including the work rate, the air flow and the concentration of the contaminant in the atmosphere. A dust mask should be discarded and replaced with a new one if: • The respirator is removed while in a contaminated area. • Excessive clogging of the respirator causes breathing difficulty or discomfort. • The respirator becomes damaged. • The unused respirators are not in their protective packaging (once open they are activated). All respiratory equipment should be chosen in conjunction with BS EN 529:2005 “Respiratory Protective devises – Recommendations for selection, use, care and maintenance”. Do not use these respirators or enter in an area where: • The Oxygen concentration is not known or is less than 19%. • Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health. • Particulate concentrations exceed levels fixed by the applicable health and safety regulations or protection factors x NPF, whichever is lower. (Nominal protection factors: 4.5 for FFP1, 12.5 for FFP2 and, 50 for FFP3) • Gases and/or vapours are present except for respirators designated as protecting against vapours, in which case vapour concentrations should not exceed 4.5 NPF. • The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble. • Do not use in explosive atmospheres. • Not to be used for firefighting. When transporting this product, retain in its original packaging and keep away from mechanical and chemical hazards. None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These disposable dust half masks are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the user and not the manufacturer or supplier to determine the disposable dust, half mask suitability for the intended use.

Compliance & Conformity

NRCS Homologated as per SANS 10338:2009 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993), and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996). SANS 50149:2003 Respiratory protective devices – Filtering half mask to protect against particles– Requirements, testing, marking, NRCS Type Approval No. NRCS AZ2006/20. BS EN 149:2001 Respiratory protective devices – Filtering half masks to protect against particles. CE 0086 approved.

Specifications

Style: Disposable, white, cup shape, dust mask Protection class: FFP2 NR(Non re-useable) Protection Factor (NPF): 12.5 x OEL Assigned Protection Factor (APF): 10 x APF Particulate size distribution: 0.6 µm (MMD) & 0.4 µm (SD) Total Inward Leakage: <8% Penetration: <6% CO2 content of inhalation: < 1% Filtering Efficiency: 94 %

Materials

1. Outer Material Polyester fabric. 2. Filter Material P2 Melt Blown filter medium. 3. Inner Mould Material Polypropylene spun bound scrim 4. Nose Bridge Adjuster: Aluminium nose bridge adjuster 5. Head band: Elastic

Cleaning & Maintenance

This is a disposable item so no cleaning and maintenance is required.

Shelf life

3 years. The expiry date of each item is indicated on box packaging.

Disposal

All industrial waste should be disposed of correctly per local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substances they were used for. Please consider recycling

Reviews

There are no reviews yet.

Be the first to review “Dromex DUST MASK FFP1”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping
0