Dromex Single Half Mask


In stock items:
Sameday Shipping - Delivery 3-5 business days
Any Backordered items:
Ships within 2 weeks, add 3 - 5 business days for delivery


Soft PVC mask with deep face mould for a comfortable fit with an excellent seal

Dual wide elastic connected with a pin swivel connector, adjustable and with a quick release toggle

Efficient exhalation mask

For use with the single unifit filter cartridge system


NRCS AZ2011/43


Soft PVC mask

In stock (can be backordered)

Dromex® DH101, Single cartridge, reusable, lightweight and adjustable, half mask is used in combination with Dromex® gas and/or particulate filter/cartridges, designed to protect the user’s respiratory system from
breathing in the hazards of dangerous gases and particulates. The DH101 half mask design entails a high performance exhalation valve, situated in a blue PVC (Polyvinyl chloride) body, that has a soft seal on the face with a dual elastic headband complete and large quick release toggles for ease of putting on and taking off when used with gloves.

Additional information

Weight 0.576 kg
Dimensions 12 × 16 × 12 cm
Special Instructions

All respiratory selection should be read in conjunction with BS EN 529:2005 “Respiratory Protective devices – Recommendations for selection, use, care and maintenance”. These respirators do not supply oxygen. Do not use these respirators or enter in area where: • The Oxygen concentration is not known or is less than 19.5% (e.g. tanks or other poorly ventilated areas). • Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health. • Do not use in explosive atmospheres. • Particulate or gas concentrations exceed levels fixed by the applicable health and safety regulations. • The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble. • Not to be used for firefighting. None of the materials or processes used in the manufacture of theseproducts are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality ofproduction by means of monitoring and inspection. These respirators are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in theselection of Personal Protective Equipment. Actual conditions of use cannot be directly simulated in a test enviromenttherefore it is the responsibility of the user and not the manufacturer or supplier to determine the respirators suitability for the intended use. All respirators should be thoroughly inspected before use to ensure no damage is present. Immediately discard, should there be visible damage on the respirator.

Compliance & Conformity

NRCS Homologated to SANS 10338: 1999 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993), and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996). NRCS Homologated as per SANS 50140:1998, Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking. NRCS Type Approval No.: AZ 2011/43. CE EN approval as per BSI 0086, Type Examination No. 69552 – UNIFIT Half Mask as per approval from IOM (Institute of Occupational medicine) EH8 9SU, WHO collaborating centre for occupational health. Testing in accordance with BS 7356: 1990 EN140:1998 as per test report AP/530/268(a), contract No.: AP/530/268. Quality System as per ISO9001:2008 certificate HK01/00703 as issued by SGS, UKAS approval number 005. Approved for used with particulate filters as per EN 143:2003 and gas filters as per EN14387:2004 + A1:2008.


Style: Single cartridge, adjustable, PVC body, re-useable half mask with a storage protective mould Half mask body: PVC (Polyvinyl Chloride) Harness: Withstands a pull of 50 N applied for 10 s Resistance to temperature: a) 24 h in a dry atmosphere of (70 + 3) "C b) 24 h at a temperature of (-30 * 3) "C. Inward leakage: <5 % of the inhaled air and mean result not exceeds 2%. Exhalation valve: Continuous exhalation flow of 300 I/min over a period of 30s. Housing and its attachment withstood an axial tensile force of 50N applied for 10s. Mass: 95.5 g with no cartridge assembly Additional: There are no metal fittings in this device Half mask storage bags are available, Dromex part number: DHRB-BLK


1. Blue PVC Mask Body 2. Grey Polypropylene Valve Cover 3. Grey Silicon Valve Piece 4. Grey Polypropylene Valve Seat 5. Black /Blue(20mm) Elastic Headband (19mm) 6. Black Polypropylene Buckle – M 7. Black Polypropylen Buckle – F 8. Black Polypropylene Swivel Clip 9. Black Polypropylene Locating Pin


There are no reviews yet.

Be the first to review “Dromex Single Half Mask”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping