Dromex P2PF Twin Unifit Pre-Filter

R135.47

In stock items:
Sameday Shipping - Delivery 3-5 business days
Any Backordered items:
Ships within 2 weeks, add 3 - 5 business days for delivery
PRODUCT INFO

CODE: DHCT P2PF

These gas, vapor and dust filters are designed to fit the Dromex range of Midi Masks. The full gas and particulate filter range is color coded to European standards in EN141, EN143 and EN14387

  • The pre-filter kit ensures maximum filter life and can reduce exposure of cartridges, cutting down on unnecessary gas filter changes. Pre-filters are for fitting to gas filters only.

Available on backorder

SKU: DHCT-P2PF Categories: ,

Additional information

Weight 0.45 kg
Dimensions 17 × 10 × 4 cm
Special Instructions

All respiratory equipment should be read in conjunction with BS EN 529:2005 “Respiratory Protective devises – Recommendations for selection, use, care and maintenance”. Do not use these cartridges or enter in area where: • The Oxygen concentration is not known or is less than 19.5%. • Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health. Particulate or gas concentrations exceed levels fixed by the applicable health and safety regulations. • The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble. • Not to be used for firefighting. • Do not use in explosive atmospheres. These cartridges do not supply oxygen. DO NOT use in oxygen deficient atmospheres (e.g. tanks or other poorly ventilated areas). The lifetime of a filter depends on many factors including the work rate, the air flow and the concentration of the contaminant in the atmosphere. A particulate filter should be changed immediately when chemical breakthrough of a contaminant is detected by smell, taste or any other means. A dust filter should be changed when breathing becomes impaired.The UNIFIT SINGLE FILTER CARTRIDGE is for use with SINGLE filter masks only. DO NOT USE SINGLE CARTRIDGES WITH DROMEX TWIN CARTRIDGE MASKS. DO NOUT USE A PRE-FILTER OVER A PARTICULATE CARTRIDGE. Use genuine DROMEX UNIFIT particulate cartridges and particulate pre-filters. None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These particulate filters are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the pre-filter suitability for the intended use. All filters should be thoroughly inspected before use to ensure no damage is present. Immediately discard once open inadvertently and if damaged (eg dents).

Changing Filter Cartridge

Remove pre-filter assembly from the filter cartridge. Unclip the pre-filter from the housing and replace with another pre – filter into the housing ensuring that it has clipped in

Compliance & Conformity

• NRCS Homologated as per SANS 10338:2009 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993), and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996). • SANS 50143:2003, Respiratory protective devices – Particle filters – Requirements, testing, marking, NRCS Type Approval No.: AZ 2011/49. • Approved for used with half masks as per EN140:1998. • CE EN approval as per BSI CE No. 0086.

Specifications

Style: Twin cartridge, re-useable P2 pre-filter in a retainer Breathing Resistance: @ 30 l/min, maximum 0.7 mbar @ 95.5l/min, maximum 2.4 mbar Filter Penetration Maximum: Sodium Chloride @95l/min is 6% Paraffin oil @ 95l/min is 6% Filter efficiency : 94%

Materials

1. White Polypropylene filter housing 2. White Linear low density polyethylene 3. P2MB (Melt blow) activated filter

Cleaning & Maintenance

The exterior of the filter can be cleaned with the use of a dry cloth. Solvents must not be used and care should be taken to ensure no water enters the filter.

Shelf life

5 years. The expiry date of each item is indicated on the cartridge.

Disposal

All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Respiratory protective devices should be disposed of considering the hazardous substance they were used for. Please consider recycling.

Reviews

There are no reviews yet.

Be the first to review “Dromex P2PF Twin Unifit Pre-Filter”

Your email address will not be published. Required fields are marked *

Shopping cart0
There are no products in the cart!
Continue shopping
0