Dromex Dv-11 Wide Vision Goggles
Clear polycarbonate mono lens
Indirect dual ventilation system
14 mm elasticated & adjustable cotton knit headband
High quality polyvinyl chloride frame
Face contact area designed for comfort and seal
Compatible with respiratory equipment
Scratch resistant lens
120° lateral vision
EN 166 FCE 3, 4, 9, B CE
SUITABLE FOR USE IN
Light Chemical Splashes
In stock (can be backordered)
Designed for compatibility with other PPE, such as industrial hats, hearing protectors and respiratory protective half mask device’s the DV-11 and DV-21 goggles are lightweight with an impact resistant anti-scratch polycarbonate lens. These features ensures a firm fit promoting enhanced product performance and user comfort.
|22 × 9 × 4 cm
• Failure to adhere to all instructions and precautionary measures can result in injury. • If the user has eye conditions or vision impairment, they must consult with a registered physician prior to use. • Any damages to this protective device, may reduce clarity of sight that could result in injury. • Following any major detectible defects on the goggle, the goggle should be replaced immediately. • This eye protector is suitable for use to the lowest marking on the lens (ocular) and frame. • If the lens becomes damaged the eye protector should be replaced. • It shall be the responsibility of the persons and organizations that use this goggle, to establish safety and health practices and to determine the applicability of regulatory limitations prior to use of this goggle. • This goggle is designed to be used with other PPE equipment.
|Compliance & Conformity
Designed according to CE, EN 166:2001 standard. No test report available. Quality System as per ISO 9001:2008.
Style: Clear polycarbonate lens gogglewith vents and adjustable head straps Lens: Polycarbonate clear UV filter, shade 2-1,2 with scratch resistant lens Frame: Polyvinyl chloride vented frame and cotton knit head band Refractive Power: ±0.06 D Astigmatism: 0.06 D Optical class: 1 – ± 0, 06 DIOPTRES for permanent wear Lateral vision: 120 degrees Minimum Velocity particles: Class F, 45 m/s ( DV-11) and Class B, 120 m/s (DV-12) Mass: DV-11 58g DV -21 70g Additional: Available in direct mesh vent DV-11 and indirect vent, DV-21
|Inspection Frequency and Details
Prior to use the goggle should be free of any potential contaminants that can affect its intended performance. The goggle should be inspected by the user at the end of every use and then again prior to each use.Cracked eyewear must be removed from service as they will reduce eye protection and obstruct vision.
|Cleaning & Maintenance
Designed as re-usable protective eyewear. After use clean with a mild cleaning liquid, carefully rinse off all traces of the cleaning liquid and dry with a soft cloth and gently wipe with a soft spectacle cleaning material. Do not clean on clothing nor use abrasive cleaners.
|Limitations of Use
These goggles should not be used for any athletic game, recreational activities, paintball or simulated water activities. These goggles are not suitable to protect from chemical, biological, radiological, and nuclear (CBRN) agents.
|Recommendations and Restrictions
The use of these goggles is restricted to the scope and application as intended by EN 166:2001.
The duration of the goggles cannot be determined by a timeline as its intended for normal day to day use. Ensure proper care and maintenance (inspection and cleaning) is adhered too. Under normal circumstances the eye protector should offer adequate protection for 3 years.
All industrial waste should be disposed of correctly according to local regulations and good disposal practice. Safety eyewear should be disposed of considering the hazardous substance they were used for or could be contaminated with. Please consider recycling.